All information products included in http://ics-cert.us-cert.gov are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see http://www.us-cert.gov/tlp/.
ICS-CERT originally released Advisory ICSA-12-177-01P on the US-CERT Portal on July 05, 2012. This web page release was delayed to provide the vendor time to contact customers concerning this information.
Independent researcher Carlos Mario Penagos Hollmann has identified an uncontrolled search path element vulnerability, commonly referred to as a dll hijack, in Invensys’s Wonderware InTouch application. Successfully exploiting this vulnerability could lead to arbitrary code execution.
ICS-CERT has coordinated the report with Invensys, which has produced an upgrade to address this vulnerability. Mr. Hollmann has validated that the upgrade resolves the reported vulnerability.
A vulnerability has been discovered in a common dll component used by InTouch and other Wonderware System Platform products. The following Invensys products contain the vulnerable dll and are affected:
- InTouch 2012 and all prior versions,
- Wonderware Application Server 2012 and prior versions,
- Wonderware Information Server 4.5 and prior versions,
- Foxboro Control Software 4.0 and all prior versions,
- InFusion CE/FE/SCADA 2.5 and all prior versions,
- InBatch 9.5 SP1 and all prior versions, and
- Wonderware Historian 10.0 SP1 and all prior versions.
Successful exploitation of this vulnerability may lead to arbitrary code execution.
Impact to individual organizations depends on many factors that are unique to each organization. ICS-CERT recommends that organizations evaluate the impact of this vulnerability based on their operational environment, architecture, and product implementation.
The Invensys Wonderware InTouch HMI is used in many industries worldwide, including manufacturing, energy, food and beverage, chemical, and water and wastewater. The Information Server provides industrial information content including process graphics, trends, and reports. The Invensys Wonderware InTouch HMI Web Client provides access to these reports, analyses, and write back capabilities to processes.
Uncontrolled Search Path Element1
InTouch uses an open or uncontrolled search path to find resources, which could allow anunauthorized user to easily locate and exploit one or more locations. An unauthorized user could place a malicious dll in a directory where it could be loaded before the valid dll. An attacker must have access to the host file system to exploit this vulnerability. The exploit is only triggered when a local user runs the vulnerable application and loads a malformed dll file.
CVE-2012-30052 has been assigned to this vulnerability. A CVSS v2 Base Score of 6.6 has also been assigned; the CVSS vector string is (AV:L/AC:M/Au:S/C:C/I:C/A:C).
This vulnerability cannot be exploited remotely or without user interaction. The exploit is only triggered when a local user runs the vulnerable application and loads a malformed dll file.
Existence of Exploit
No known public exploits specifically target this vulnerability.
An attacker with a moderate skill level would be able to exploit this vulnerability.
Invensys has provided instructions and a link to the software download that can be found here: https://wdn.wonderware.com/sites/WDN/Pages/Downloads/Software.aspx.
Any machine running one or more of the products listed above is affected and should be patched. No other components of the Wonderware installed products are affected. Install the Security Update using instructions provided in the ReadMe file for the product and component being installed. In general, the user should:
- Read the installation instructions provided with the patch,
- Shut down any of the affected software products,
- Install the update, and
- Restart the software.
ICS-CERT encourages asset owners to take additional defensive measures to protect against this and other cybersecurity risks.
- Minimize network exposure for all control system devices. Critical devices should not directly face the Internet.
- Locate control system networks and remote devices behind firewalls, and isolate them from the business network.
- When remote access is required, use secure methods, such as Virtual Private Networks (VPNs), recognizing that VPN is only as secure as the connected devices.
The Control Systems Security Program (CSSP) also provides a section for control systems security recommended practices on the CSSP Web page. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
- 1. CWE-427 Uncontrolled Search Path Element, http://cwe.mitre.org/data/definitions/427.html, Web site last visited July 23, 2012.
- 2. NVD, http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2012-3005, NIST uses this advisory to create the CVE Web site report. This Web site will be active sometime after publication of this advisory.
For any questions related to this report, please contact the NCCIC at:
Toll Free: 1-888-282-0870
The NCCIC continuously strives to improve its products and services. You can help by choosing one of the links below to provide feedback about this product.