All information products included in http://ics-cert.us-cert.gov are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see http://www.us-cert.gov/tlp/.
This advisory is a follow-up to the previously updated portal advisory titled ICSA-12-234-01AP—GE Intelligent Platforms Proficy Real-Time Information Portal Multiple Vulnerabilities, which was published September 17, 2012, in the US-CERT secure Portal library. This advisory provides mitigation details for multiple vulnerabilities that affect the GE Intelligent Platforms Proficy Real-Time Information Portal.
Researcher Kuang-Chun Hung of Information and Communication Security Technology Center (ICST) identified multiple vulnerabilities in GE’s Intelligent Platforms Proficy Real-Time Information Portal. Three improper input validation vulnerabilities could lead to a possible denial of service (DoS). GE has released patches that fix the vulnerabilities in Versions 3.5 SP1, 3.5, and 3.0 SP1. Successful exploitation of these vulnerabilities could affect multiple sectors worldwide.
These vulnerabilities can be exploited remotely.
The following GE product versions are affected:
- Intelligent Platforms Proficy Real-Time Information Portal v2.6,
- Intelligent Platforms Proficy Real-Time Information Portal v3.0,
- Intelligent Platforms Proficy Real-Time Information Portal v3.0 SP1,
- Intelligent Platforms Proficy Real-Time Information Portal v3.5, and
- Intelligent Platforms Proficy Real-Time Information Portal v3.5 SP1.
Note: These vulnerabilities do not affect versions of Proficy Real-Time Information Portal v2.5 and earlier.
By successfully exploiting these vulnerabilities, attackers could initiate a DoS or possible remote code execution in the Remote Interface Service. These could affect the availability of the system. Impact to individual organizations depends on many factors that are unique to each organization. ICS-CERT recommends that organizations evaluate the impact of these vulnerabilities based on their operational environment, architecture, and product implementation.
According to GE, Proficy Real-Time Information Portal is a Web-based data visualization and reporting tool that is deployed across multiple industries worldwide.
Three improper input validation vulnerabilities have been identified in the Remote Interface Service that operates on Port 5159/TCP.
Improper Input Validationa
These vulnerabilities can be exploited by sending additional data into the buffer, which is not properly checked as input data by the service. As a result, an attacker can cause a crash of the system leading to a DoS condition.
CVE-2012-3010,b CVE-2012-3021,c and CVE-2012-3026d have been assigned to these vulnerabilities. A CVSS v2 base score of 7.1 has also been assigned; the CVSS vector string is (AV:N/AC:M/Au:N/C:N/I:N/A:C).e
These vulnerabilities can be exploited remotely.
EXISTENCE OF EXPLOIT
No known exploits specifically target these vulnerabilities.
An attacker with a high skill level could exploit these vulnerabilities.
GE has released a security advisory and patches that fix the vulnerabilities in Versions 3.5 SP1, 3.5, and 3.0 SP1. The currently available patches can be found at GE’s Intelligent Platforms Software Download Web Sites listed below:
- Proficy Real-Time Information Portal 3.5 SP1 SIM 1
- Proficy Real-Time Information Portal 3.5 SIM 17
- Proficy Real-Time Information Portal 3.0 SP1 SIM 44
Note: Proficy SIMs are cumulative. All future SIMs will include these updates.
Proficy Real-Time Information Portal customers using Versions 3.0 and 2.6 are encouraged to upgrade to one of the versions described above and apply the appropriate product update.
ICS-CERT encourages asset owners to take additional defensive measures to protect against this and other cybersecurity risks.
- Minimize network exposure for all control system devices. Critical devices should not directly face the Internet.
- Install control system networks and remote devices behind firewalls, and isolate them from the business network.
- When remote access is required, use secure methods, such as Virtual Private Networks (VPNs), recognizing that VPN is only as secure as the connected devices.
ICS-CERT also provides a section for control systems security recommended practices on the US-CERT Web page. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies. ICS-CERT reminds organizations to perform proper impact analysis and risk assessment prior to taking defensive measures.
Additional mitigation guidance and recommended practices are publicly available in the ICS-CERT Technical Information Paper, ICS-TIP-12-146-01A—Cyber Intrusion Mitigation Strategies.
Organizations observing any suspected malicious activity should follow their established internal procedures and report their findings to ICS-CERT for tracking and correlation against other incidents.
In addition, ICS-CERT recommends that users take the following measures to protect themselves from social engineering attacks.
- Do not click Web links or open unsolicited attachments in email messages.
- Refer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.
- Refer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.
- a. CWE, http://cwe.mitre.org/data/definitions/20.html, CWE-20: Improper Input Validation, Web site last accessed October 15, 2012.
- b. NVD, http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2012-3010 , NIST uses this advisory to create the CVE Web site report. This Web site will be active sometime after publication of this advisory.
- c. NVD, http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2012-3021, NIST uses this advisory to create the CVE Web site report. This Web site will be active sometime after publication of this advisory.
- d. NVD, http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2012-3026 , NIST uses this advisory to create the CVE Web site report. This Web site will be active sometime after publication of this advisory.
- e. CVSS, http://nvd.nist.gov/cvss.cfm?name=&vector=AV:N/AC:M/Au:N/C:N/I:N/A:C&version=2
For any questions related to this report, please contact the NCCIC at:
Toll Free: 1-888-282-0870
The NCCIC continuously strives to improve its products and services. You can help by choosing one of the links below to provide feedback about this product.