All information products included in http://ics-cert.us-cert.gov are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see http://www.us-cert.gov/tlp/.
Siemens has identified a resource exhaustion vulnerability that causes a denial-of-service condition in the Siemens SCALANCE S613 device. Siemens recommends that customers contact Siemens customer support in order to obtain advice on a solution for the customer’s specific environment.
This vulnerability could be exploited remotely.
The following Siemens SCALANCE versions are affected:
- SCALANCE S613 (MLFB: 6GK5613-0BA00-2AA3): All versions.
An attacker exploiting this vulnerability can cause the device to enter a state that requires a manual reboot to recover.
Impact to individual organizations depends on many factors that are unique to each organization. NCCIC/ICS-CERT recommends that organizations evaluate the impact of this vulnerability based on their operational environment, architecture, and product implementation.
Siemens is a multinational company headquartered in Munich, Germany.
The affected product, Siemens SCALANCE firewall, is used to protect trusted industrial networks from untrusted networks. It allows filtering of incoming and outgoing network connections in different ways. According to Siemens, Siemens SCALANCE is deployed across several sectors including Chemical, Critical Manufacturing, Defense Industrial Base, Energy, Transportation Systems, and Water and Wastewater Systems. Siemens estimates that this product is used worldwide.
Certain legitimate messages sent to Port 443/TCP could cause a denial-of-service condition affecting the integrated web server of affected devices. A manual reboot is required to recover the web server of the device.
This vulnerability could be exploited remotely.
EXISTENCE OF EXPLOIT
No known public exploits specifically target this vulnerability.
An attacker with a low skill would be able to exploit this vulnerability.
Siemens recommends that customers contact Siemens Customer Support in order to obtain advice on a solution for the customer’s specific environment. Siemens support can be contacted via email at email@example.com or via phone +49 (911) 895-7222.
For more information on this vulnerability and more detailed mitigation instructions, please see Siemens Security Advisory SSA-751155 at the following location:
ICS-CERT recommends that users take defensive measures to minimize the risk of exploitation of this vulnerability. Specifically, users should:
- Monitor traffic to Port 443/TCP.
- Minimize network exposure for all control system devices and/or systems, and ensure that they are not accessible from the Internet.
- Locate control system networks and remote devices behind firewalls, and isolate them from the business network.
ICS-CERT reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
ICS-CERT also provides a section for control systems security recommended practices on the ICS-CERT web page at: http://ics-cert.us-cert.gov/content/recommended-practices. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
Additional mitigation guidance and recommended practices are publicly available in the ICS‑CERT Technical Information Paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies, that is available for download from the ICS-CERT web site (http://ics-cert.us-cert.gov/).
Organizations observing any suspected malicious activity should follow their established internal procedures and report their findings to ICS-CERT for tracking and correlation against other incidents.
- a. CWE-400: Uncontrolled Resource Consumption ('Resource Exhaustion'), http://cwe.mitre.org/data/definitions/400.html, web site last accessed April 12, 2016.
- b. NVD, http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2016-3963, web site last accessed April 12, 2016.
- c. CVSS Calculator, https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L, web site last accessed April 12, 2016.
For any questions related to this report, please contact the NCCIC at:
Toll Free: 1-888-282-0870
The NCCIC continuously strives to improve its products and services. You can help by choosing one of the links below to provide feedback about this product.