All information products included in http://ics-cert.us-cert.gov are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see http://www.us-cert.gov/tlp/.
1. EXECUTIVE SUMMARY
- CVSS v3 9.8
- ATTENTION: Exploitable remotely/low skill level to exploit
- Vendor: Crestron
- Equipment: TSW-X60 and MC3
- Vulnerabilities: OS Command Injections, Improper Access Control, Insufficiently Protected Credentials
2. RISK EVALUATION
Successful exploitation of these vulnerabilities may allow remote code execution with escalated system privileges.
3. TECHNICAL DETAILS
3.1 AFFECTED PRODUCTS
The following products and versions are affected:
- TSW-X60, all versions prior to 2.001.0037.001; and
- MC3, all versions prior to 1.502.0047.001
3.2 VULNERABILITY OVERVIEW
This vulnerability may allow unauthenticated remote code execution via a Bash shell service in Crestron Toolbox Protocol (CTP). This vulnerability only affects TSW-X60 devices.
The vulnerability may allow unauthenticated remote code execution via command injection in Crestron Toolbox Protocol (CTP). This vulnerability only affects TSW-X60 devices.
The devices are shipped with authentication disabled, and there is no indication to users that they need to take steps to enable it. When compromised, the access to the CTP console is left open.
The passwords for special sudo accounts may be calculated using information accessible to those with regular user privileges. Attackers could decipher these passwords, which may allow them to execute hidden API calls and escape the CTP console sandbox environment with elevated privileges.
- CRITICAL INFRASTRUCTURE SECTORS: Government Facilities, Commercial Facilities
- COUNTRIES/AREAS DEPLOYED: Worldwide
- COMPANY HEADQUARTERS LOCATION: United States
Jackson Thuraisamy, working with Security Compass, reported some of these vulnerabilities to Crestron. In addition, Ricky “HeadlessZeke” Lawshae, working with Trend Micro’s Zero Day Initiative, reported these vulnerabilities to NCCIC.
Crestron recommends users upgrade their devices to the newest firmware located at:
TSW-X60 (login required) – https://www.crestron.com/en-US/Software-Firmware/Firmware/Touchpanels/TSW-560-TSW-760-TSW-1060/2-001-0040-01
Crestron also recommends users refer to Crestron’s Online Help for more information about these and other vulnerabilities (Article #5471). Information for hardening devices is available in Article #5571.
NCCIC recommends users take defensive measures to minimize the risk of exploitation of this vulnerability. Specifically, users should:
- Minimize network exposure for all control system devices and/or systems, and ensure that they are not accessible from the Internet.
- Locate control system networks and remote devices behind firewalls, and isolate them from the business network.
- When remote access is required, use secure methods, such as Virtual Private Networks (VPNs), recognizing that VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize that VPN is only as secure as the connected devices.
NCCIC reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
NCCIC also provides a section for control systems security recommended practices on the ICS-CERT web page. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
Additional mitigation guidance and recommended practices are publicly available on the ICS-CERT website in the Technical Information Paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
Organizations observing any suspected malicious activity should follow their established internal procedures and report their findings to NCCIC for tracking and correlation against other incidents.
No known public exploits specifically target these vulnerabilities.
For any questions related to this report, please contact the NCCIC at:
Toll Free: 1-888-282-0870
The NCCIC continuously strives to improve its products and services. You can help by choosing one of the links below to provide feedback about this product.