All information products included in http://ics-cert.us-cert.gov are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see http://www.us-cert.gov/tlp/.
1. EXECUTIVE SUMMARY
- CVSS v3 7.1
- Vendor: Medtronic
- Equipment: 2090 CareLink Programmer
- 29901 Encore Programmer
- Vulnerabilities: Storing Passwords in a Recoverable Format, Relative Path Traversal, Improper Restriction of Communication Channel to Intended Endpoints
2. UPDATE INFORMATION
This updated advisory is a follow-up to the original advisory titled ICSMA-18-058-01 Medtronic 2090 CareLink Programmer Vulnerabilities (Update A) that was published June 28, 2018, on the NCCIC/ICS-CERT website.
3. RISK EVALUATION
Successful exploitation of these vulnerabilities may allow an attacker with physical access to a 2090 Programmer to obtain per-product credentials to the software deployment network. These credentials grant access to the software deployment network, but access is limited to read-only versions of device software applications.
Additionally, successful exploitation of these vulnerabilities may allow an attacker with local network access to influence communications between the Programmer and the software deployment network.
Additional product security review revealed potential for an attacker to remotely exploit a subset of these vulnerabilities. The SessionSync and RemoteView features associated with the affected products are not affected by the vulnerabilities reported in this advisory.
4. TECHNICAL DETAILS
4.1 AFFECTED PRODUCTS
The following versions of the Medtronic CareLink 2090 Programmer, a device used by trained personnel at hospitals and clinics to program and manage Medtronic cardiac devices, are affected:
- 2090 CareLink Programmer, all versions.
- 29901 Encore Programmer, all versions.
4.2 VULNERABILITY OVERVIEW
The affected product uses a per-product username and password that is stored in a recoverable format.
The affected product’s software deployment network contains a directory traversal vulnerability that could allow an attacker to read files on the system.
The affected product uses a virtual private network connection to securely download updates. The product does not verify it is still connected to this virtual private network before downloading updates. The affected products initially establish an encapsulated IP-based VPN connection to a Medtronic-hosted update network. Once the VPN is established, it makes a request to a HTTP (non-TLS) server across the VPN for updates, which responds and provides any available updates. The programmer-side (client) service responsible for this HTTP request does not check to ensure it is still connected to the VPN before making the HTTP request. Thus, an attacker could cause the VPN connection to terminate (through various methods and attack points) and intercept the HTTP request, responding with malicious updates via a man-in-the-middle attack. The affected products do not verify the origin or integrity of these updates, as it insufficiently relied on the security of the VPN. An attacker with remote network access to the programmer could influence these communications.
- CRITICAL INFRASTRUCTURE SECTORS: Healthcare and Public Health
- COUNTRIES/AREAS DEPLOYED: Worldwide
- COMPANY HEADQUARTERS LOCATION: Dublin, Ireland
Researchers Billy Rios and Jonathan Butts of Whitescope LLC identified these vulnerabilities and reported them to NCCIC.
Medtronic has assessed the vulnerabilities and determined that no new potential safety risks were identified. In order to enhance system security, Medtronic has added periodic integrity checks for files associated with the software deployment network. Additionally, Medtronic has developed server-side security changes that further enhance security. Medtronic reports they will not be issuing a product update; however, Medtronic has identified compensating controls within this advisory to reduce the risk of exploitation and reiterates the following from the CareLink 2090 Programmer Reference Manual:
- Maintain good physical controls over the programmer. Having a secure physical environment prevents access to the internals of the programmer.
- Only connect the programmer to managed, secure networks.
- Update the software on the programmer when Medtronic updates are available.
- Alternatively, disconnect the programmer from the network. Network connectivity is not required for normal programmer operation.
- Offline updates are available. Contact your Medtronic representative for more information.
After additional review and risk evaluation of the affected products, Medtronic has disabled the network-based software update mechanism, including both the VPN and the HTTP subservices, as an immediate security mitigation. Users should not attempt to update the affected products over the network as this update mechanism is vulnerable to the attack described in section 4.2.3. Medtronic will continue to implement and deploy increased security protections and mitigations to address the vulnerabilities in this advisory.
Users should still obtain and apply updates via controlled USB dongles and should contact their Medtronic representative for more information. Medtronic recommends that affected products continue to be used for their intended purpose in the previously described manner.
Medtronic has released a security bulletin for the 2090 CareLink Programmer, which is available, with contact information, at the following location:
NCCIC recommends users take defensive measures to minimize the risk of exploitation of this vulnerability. Specifically, users should:
- Minimize network exposure for all control system devices and/or systems, and ensure that they are not accessible from the Internet.
- Locate control system networks and remote devices behind firewalls, and isolate them from the business network.
- When remote access is required, use secure methods, such as Virtual Private Networks (VPNs), recognizing that VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize that VPN is only as secure as the connected devices.
NCCIC reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
NCCIC also provides a section for control systems security recommended practices on the ICS-CERT web page. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
Additional mitigation guidance and recommended practices are publicly available on the ICS-CERT website in the Technical Information Paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
Organizations observing any suspected malicious activity should follow their established internal procedures and report their findings to NCCIC for tracking and correlation against other incidents.
No known public exploits specifically target these vulnerabilities. These vulnerabilities are not exploitable remotely. High skill level is needed to exploit.
For any questions related to this report, please contact the NCCIC at:
Toll Free: 1-888-282-0870
The NCCIC continuously strives to improve its products and services. You can help by choosing one of the links below to provide feedback about this product.