All information products included in http://ics-cert.us-cert.gov are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see http://www.us-cert.gov/tlp/.
ICS-CERT is aware of a public report about an RPC server vulnerability with proof-of-concept (PoC) exploit code affecting the Advantech BroadWin WebAccess software, a supervisory control and data acquisition/human-machine interface (SCADA/HMI) product. According to this report, the WebAccess software is vulnerable to an RPC exploit against the WebAccess network service on either Port 4592/TCP or 14592/TCP. This report was released by amisto0x07 and Z0mb1E without coordination with either the vendor or ICS-CERT.
ICS-CERT has notified the affected vendor of this report. ICS-CERT has also determined, that while similar to the report by Rubén Santamarta identified in “ICS-ALERT-11-081-01 – BroadWin WebAccess”, this exploit targets a different vulnerability in the RPC service.
ICS-CERT is issuing this alert to provide early notice of this report and to identify baseline mitigations for reducing risks to this and other cybersecurity attacks.
The report included vulnerability details and PoC exploit code for the following vulnerability:
|Missing Authentication for Critical Function1||Remote||Possible Remote Code Execution / Denial of Service|
Please report any issues affecting control systems in critical infrastructure environments to ICS-CERT.
ICS-CERT is currently coordinating with the vendor to identify mitigations.
ICS-CERT recommends that users take defensive measures to minimize the risk of exploitation of these vulnerabilities. Specifically, users should:
- Minimize network exposure for all control system devices. Control system devices should not directly face the Internet.2
- Locate control system networks and devices behind properly configured firewalls addressing access to Port 4592/TCP or 14592/TCP, and isolate them from the business network.
- If remote access is required, employ secure methods, such as Virtual Private Networks (VPNs), recognizing that VPN is only as secure as the connected devices.
ICS-CERT reminds organizations to perform proper impact analysis and risk assessment prior to taking defensive measures.
The Control Systems Security Program (CSSP) also provides a recommended practices section for control systems on the US-CERT website. Several recommended practices are available for reading or download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.3
Organizations that observe any suspected malicious activity should follow their established internal procedures and report their findings to ICS-CERT for tracking and correlation against other incidents.
- 1. http://cwe.mitre.org/data/definitions/306.html, website last accessed February 08, 2012
- 2. ICS-CERT ALERT, http://www.us-cert.gov/control_systems/pdf/ICS-Alert-10-301-01.pdf, website last accessed February 08, 2012.
- 3. Control Systems Security Program (CSSP) Recommended Practices, http://www.us-cert.gov/control_systems/practices/Recommended_Practices.html, website last accessed February 08, 2012.
For any questions related to this report, please contact the NCCIC at:
Toll Free: 1-888-282-0870
The NCCIC continuously strives to improve its products and services. You can help by choosing one of the links below to provide feedback about this product.